EM and Water
When EM ceramics are placed in water they have an immediate
effect on the water through a process of resonance.
The longer that the EM
ceramics remain in the water, the better the results will be.
The recommended
amount of EM ceramics depends on the amount of water.
The EM ceramics must
amount to one thousandth part of the water mass. Therefore, one cubic metre of
water will require one kilogram of ceramics.
Where larger and constant masses
of water are concerned, such as ponds or swimming pools, the amount of ceramics
can be reduced by ten to twenty percent.
It has been shown that the EM and EM ceramics have the ability to 're-structure' the properties of water (see EM-X).
These properties can therefore be harnessed in various ways:
1.
Improving the quality of drinking water. Place a EM ring in your water jug and
you will notice improved quality.
2. In the bath - use a ceramic bath ring
to energise the water and your body
3. In the washing machine and dish washer.
- One of the most frequently occurring problems of washing machines and dishwashers
is calcification of the elements. EM ceramics make water softer and glaze on dishes
shinier and enable you to cut the amount of detergent used by half. Use one ceramic
bath rings or some ceramic pipes wrapped in a flanel.
4. Fish ponds & aquaria:
Use 1 kg of EM ceramics / 1000 litres of water.
5. Swimming pools - EM used
in swimming pools eliminates the need for chemicals and leaves you feeling 'invorgated'
after a swim. Adding EM ceramics to your filter system will prohibit the growth
of algae.
6. Ponds, lakes and aquaculture. EM has been successfully shown to
improve natural water bodies, even restoring heavily polluted waters, reducing
silt and increasing both health and productivity in fish farms.
For more information & the benefits of using EM's in the aquatic environment, please contact us.